HOME
PRODUCT
CONTACT

Wind speed sensor

Product parameters

technical parameter
Precision: ± 1m/s
Start the wind: 0.2-0.4m/s

Voltage output type
Range: 0 ~ 32.4m/s
Power supply voltage: 7V ～24V DC
Output signal: 0.4 ~ 2V

Current output type
Power consumption: less than 21mA
Range: 0 ~ 32.4m/s
Power supply voltage: 12V ～ 24V DC
Output signal: 0.4 ~ 2V
Load capacity: ≤200Ω

Pulse output type
Range: 0 ~ 60m/s
Output signal: pulse (each pulse corresponds to 0.88m/s).
Power supply voltage: 7V ～24V DC
Aeronautical plug
Insulation
 Pressure resistance
  Moisture-proof
   Anticorrosion
Application area
Easy to install
Practical cases
Product type
Current type
The signal transmission distance is long, the error is small, the accuracy is high
Pulse type
No contact, no wear and clear output waveform
Voltage type
Fast response, the response time is less than 1 microseconds
Photoelectric type
The measurement accuracy of 0.096m/s
Higher measurement precision
Can be connected to PLC, built-in pull-up resistor
3V power supply
485 type
Anti common mode interference, strong anti noise interference.

WeChat official account
Qingyi Electronics (Tianjin) Co., Ltd
Room 103, No. 16, Fuhe Road, baigutun Town, Wuqing District, Tianjin
Tel: 18622812339
Contact email: 2990169255@qq.com
Wechat code scanning consultation